Name                    Last modified       Size  Description

 Parent Directory        06-Apr-2005 22:31      -  
 CLHELP.TXT              16-Nov-1994 16:09    21k  
 CLPCM.COM               23-Nov-1994 11:56    61k  
 CLPCM.DOS               23-Nov-1994 14:56    56k  
 CLPCM.INS               28-Oct-1994 09:39     1k  
 CLSETUP.EXE             21-Feb-1995 08:52   286k  
 CONFIG.TXT              05-Apr-2003 22:41     1k  
 DOSODI/                 06-Apr-2005 22:42      -  
 MSLANMAN.DOS/           06-Apr-2005 22:42      -  
 NDIS/                   06-Apr-2005 22:42      -  
 NET.CFG                 27-Mar-1995 10:28     1k  
 OEMSETUP.INF            21-Nov-1994 13:18     1k  

There are several changes made to the CruiseLAN/PCMCIA product after
the manual was printed.

1.  If your computer goes into a sleep mode, the CruiseLAN/PCMCIA card
    will also go to sleep and will not receive messages from the network.
    Depending on the amount of time the computer and card are asleep,
    and on the configuration of your network, this computer may lose 
    connection to the network.  
    
    For example, if you are using NetWare as the operating system 
    and watchdog packets last for 5 minutes, a computer that is 
    asleep more than 5 minutes will not have responded to these packets
    and thus be disconnected from the network.

2.  If the CruiseLAN/PCMCIA card is acting as the MASTER on the network,
    the Inactivity_Min and Inactivity_Sec parameters will not be followed.
    Instead, the MASTER station will never go into sleep mode.

3.  There are reported bugs using V1.20 and V2.00 of IPXODI.COM 
    from Novell under Windows.  If you are using either of these 
    versions, you should upgrade to a later version.

4.  The Master_Name parameter does not allow for any spaces.

5.  The buttons on the main menu of the CLSETUP program are in a different
    order than the picture in the manual describes.  The <Test / Utilities>
    button is the first button listed.  When installing for the first time,
    skip this button until after the installation / configuration process is
    complete.

6.  The site survey tool described in the manual has some enhanced capabilites.
    You have the option to display the receiving nodes in order of node
    address or in order of time of arrival.  The tool also displays the total
    number of nodes that responded to the site survey.

7.  The manual incorrectly states the format of the MEMORY_ADDRESS 
    parameter in the PROTOCOL.INI file.  All addresses must be preceded by
    0x.  For example, the default line would read:

    MEMORY_ADDRESS=0XD000